Can You Fill A Pool With Well Water?

It’s a common misconception that you can’t fill a swimming pool with well water. It’s true that you can’t fill a swimming pool with well water, but you can still fill it with something else. The difference is that you don’t need to get a permit, build a fancy filter, or dig a big hole in the ground to do it.

Pros of filling your pool with well water

Using good water is the best way to fill a swimming pool with water. There are no risks of using well water because it doesn’t contain any chemicals. The water you get from a well is safe and pure.

If you want to fill a swimming pool with well water, you will just need to drill a couple of holes in the ground and let the water into the swimming pool.

When you have a swimming pool, it’s a good idea to drain it occasionally. It can get clogged with algae. If this happens, you will have to clean the water that you have in the pool. This is a good opportunity to let some of the water out. You may read also How To Clear Cloudy Pool Water

1. Less Expensive

you’ve got a swimming pool and you’re looking for a way to fill it without spending a fortune on water from the utility company.

You can easily fill your pool with well water – it’s a less expensive option and it’s also better for the environment. Well, water is plentiful and free – all you need is a way to get it from your well to your pool.

2. Well Water Is Not Metered

In most cases, well water is not metered. This means that you are using however much water you need without worrying about the cost.

On the one hand, you don’t have to worry about monthly bills and can use as much water as you need for your lawn, garden, or pool.

Cons of using well water to fill in a pool

Well, water is not an exception, as it has some drawbacks. Some of the advantages of using well water to fill your swimming pool are listed below.

Well, water is a great option for filling your pool if you have access to it, but there are some cons to consider before making the decision. You may read also the guide on How To Drain Water From Your Pool Cover

1. Metals and Minerals

In Well Water

The first disadvantage of using well water to fill your pool is that it might contain various metals and minerals. These contaminants can damage the pool and make it unsafe to swim in.

If you are worried about your well water, it is a good idea to test it. Testing your well water is a simple process. It involves testing your well water for various chemicals. This is a good idea if you suspect that your well water has an unhealthy quality.

2. Inconveniencies

There are one of the main disadvantages of using well water to fill your swimming pool. The biggest issue with using well water is that it can be inconsistent.

It can even change throughout the year. For example, you might have a dry well during the summer months and a wet well in the winter.

If you have any doubts about whether your well water is suitable for swimming, you should speak to a professional. You should never use well water to fill your swimming pool. You could end up with a damaged pool that is difficult to repair.

What To Consider Before Using Well Water in a Pool

There are many issues that you need to consider before you decide to use well water to fill your swimming pool. If your well water is safe to use for drinking, there is no reason why it should not be safe to use for swimming.

You must also check the pH levels. You should not use well water for swimming if the pH level is too low. It will make your pool water look murky. In addition, you should know if your well water is salty.

If it is, you need to add chemicals to make it less salty. If the water is saline, you should add a chlorine booster to keep it clean. The water in your swimming pool is used for keeping your family safe.

The Well’s Flow Rate

A well’s flow rate is measured in gallons per minute (GPM), and most wells have a flow rate of at least 10 GPM.

The well’s flow rate will determine how long it will take to fill the pool. If the flow rate is low, it may take several days to fill the pool. If the flow rate is high, it may only take a few hours.

Wells are usually located next to houses. These wells are built to provide us with drinking water. If we need to drink water from a well, we should not expect it to taste as good as water that we get from a municipal water supply.

The water in a well is treated differently than the water that we get from a municipal water supply. When we get water from a municipal water supply, we can expect it to be free of bacteria. You may check also How To Lower Chlorine Levels in Your Swimming Pool

Metals in Well Water

There are many metals in Well Water. You may be exposed to these metals if you drink water from a well that is located near a road. If you drink Well Water, you will notice that it may be slightly salty or have a metallic taste. This is because there are some metals in Well Water.

It may not be safe for children to drink Well Water. You should never drink Well Water if you have an ear infection or if you have stomach problems.

Because well water stays underground for a long time before it is pumped, it may contain traces of metals and minerals.

  • Copper
  • Cobalt
  • Calcium
  • Magnesium
  • Arsenic
  • Lithium
  • Zinc
  • Iron

These metals are used in well water.

Consider Your Equipment

If you are drinking Well Water, you should take care of your health and your equipment at the same time. You can help yourself by using special filters. If you have a pool in your backyard, you should consider adding a filter to the pump.

This way, your water will be much cleaner. You may also want to change the filter more often. Some Well Water may contain copper and zinc. These two metals can cause a problem if they are not removed from the water.

This is why you should be careful about what you are doing when you are doing your laundry. If you have a swimming pool, you can use chlorine to kill the bacteria and germs in the water.

Water Usage

In order to keep a swimming pool clean and operational for recreational use, the water must be replaced on a consistent basis. Depending on the size of the swimming pool, it can take hundreds or thousands of gallons of water to fill it up.

In some cases, well water can be used as a replacement for tap water to fill a swimming pool, but there are some caveats that come with using well water for this purpose.

How to fill your swimming pool with well water.

When filling your swimming pool with well water, there are some things that you need to consider. You should make sure that you are getting the right amount of water that you need for a swimming pool.

This will ensure that your swimming pool does not get too full or too empty. As well, you should make sure that the well water that you are using to fill your swimming pool is free of contaminants.

In some cases, people think that they can use well water in their swimming pools without any problems. However, this isn’t true. The problem that you can face is that you can have a negative impact on your health if you use the wrong well water. You may check out the guide on Different Types of Pool Chlorine Sanitizers

Test the Water Before Filling the Pool

When you are planning to fill your swimming pool with well water, there are several things that you need to do. First, you should test the water that you are using to fill your pool.

You can do this by testing the pH and the level of calcium. You should be able to test these levels by taking a reading with a meter. If you don’t know how to use a meter, you can call your local pool supply store and ask them how to test the water.

In order to test the pH, you will need to place a test tube in the water and then read the pH level. Calcium levels can be tested by placing a test tube in the water.

Balance the Water pH

It is important that you balance the pH level of the water in your pool. You should balance the pH level before filling the pool. You should be able to buy the necessary chemicals at a local pool supply store.

When you are balancing the pH, you should check the pH level at the pool wall and the floor. You should also check it at the water surface. The pH level of the pool should be somewhere between 7.0 and 7.50.

You can use the test kit provided by your local pool supply store to test the pH. If the pH level is too high, you will need to reduce the amount of acid that you add to the pool.

How do you make sure your pool is filled with well water?

In order to fill your pool with well water, you will need to use a pump. The pump will need to be placed in the pool, and the hose will need to be attached to the pump.

Once the hose is attached, turn on the pump and open the faucet on the hose. The water will start flowing into the pool.


A pool can provide a refreshing place to cool down on a hot day, but it can be expensive to keep filled with water from the tap. Many people choose to fill their pool with well water to save on costs. There are pros and cons to filling a pool with well water, and it is important to weigh both sides before making a decision.


How do you fill a pool if you have a well?

Add biocide to the bucket by filling it with water from the well. Wait for about five to ten minutes. The tap nearest to the good pump is where the hose should be connected. You can put the open end of the hose inside your pool. A small pool will take about 24 hours to be filled while a large pool will take 48 hours.

Is it possible to run a hose on well water?

It depends on the pump you use. The majority of people are fine with continuous running, but there are limits which prohibit usurers, such as running for less than 2 hours or leaving to cool down after 30 minutes.