How To Drain Water From Your Pool Cover?

If you’re like most people, your pool cover is probably the most important piece of your pool maintenance. It’s the first line of defense against the elements, and it keeps your pool and its contents safe. But what happens when your pool cover gets so full of water that it can’t drain anymore?

As a homeowner, you know that it is important to keep the water in your swimming pool as clean as possible. But, sometimes, things can go wrong, and you may find yourself in need of a pool cover that drains water efficiently. This post describes how to drain water from your pool cover and offers a series of tips and tricks to help you do so.

How To Drain Water From Your Pool Cover?

1. Using a bucket

If you need to drain water from your pool cover, the easiest way is to use a bucket. Fill the bucket about 2/3 full with water and place it over the top of the pool cover. Use your hands to push down on the cover so that the water flows out. Be sure to do this in a gradual manner so as not to stress the fabric of the cover. You may read also the guide on Can You Shock a Pool Without the Pump Running

2. Using an electric pump to Drain the pool cover

If your pool cover has been installed improperly or if it’s become wet and heavy from rain or snow, you can use an electric pump to drain the water. First, determine the type of electric pump you have.

You’ll need a 3-pronged plug to connect the pump to an outlet. Find an area free from vegetation and objects that could get in the way. If the cover is attached to the pool by screws, remove the screws and then detach the cover.

3. Using a Slide N Pump

If you don’t want to remove your pool cover, and just need to drain water from it, there’s an easy and inexpensive solution – using a slide n pump. All you need is a bucket or container, a slide n pump, and a hose. Simply place the bucket or container on the ground next to your pool, fit the slide n pump into the opening in the pool cover, and turn it on.

4. Removing Water Using A Submersible Pump

If your pool cover is leaking and you don’t want to take the time to fix it, you can drain the water using a submersible pump. You’ll need to remove the cover, attach the pump to the side of the pool, and turn it on. Once the water starts coming out, watch the gauge to see when it’s done. Make sure to replace the cover and tighten any screws before you return the pump to its storage location. You may read also Can You Fill A Pool With Well Water

Conclusion

In conclusion, there are a few ways to drain the water from your pool cover. If you have a pool cover pump, that is the easiest way to do it. If you don’t have a pool cover pump, you can use a garden hose to drain the water or you can use a submersible pump. Whichever way you choose, make sure to be safe and take precautions while working with water.

FAQs

How do you get standing water off a pool cover?

You have to remove the water that’s on top of the cover of the pool before you remove the pool cover. The idea of using a garden hose or bucket to fill the pool is also inefficient; instead, you should use a pool cover pump. You may check also Best Battery for Hammerhead Pool Vac

How much is water too much on a pool cover?

If your pool cover has more than two or three inches of water on it, make sure to drain off as much water as possible as quickly as possible. Remove as many leaves as possible before they all deposit on the covering.

How do you drain a pool cover for the winter?