To balance the pool water acidity, we often used pH increase. But, if you’re worried about the cloudiness after using the PH increaser, it is not much to be concerned about. Discovering a cloudy pool after a pH increase is a common site, and there are few solutions to eliminate it.
In this article, I will help you find the causes behind pool cloudy water after pH increaser, and tips to clear your pool crystal. But before I tell you the effective solution to get rid of pool cloudy pool water after the pH increase, let’s understand the culprits behind it first.
3 Causes of Cloudy Pools after pH Increaser
Insufficient Filtration & Circulation
First, you need to check your pool water’s filtration & circulation system. Inadequate filtration & circulation tends to be the primary culprit behind cloudy pool after pH increases.
It is important to have a properly functioning filtration system to remove Debris, particles, & microorganisms, contributing to water quality & clarity. If your filtration system is not running properly or for an adequate duration, these contaminants may accumulate, causing cloudiness in your pool water.
A study published by the World Health Organization stated that proper filtrations & circulations are required to improve water quality and reduce the risk of Pool Cloudy After Ph Increaser issues. The researchers also found that increasing the filtration time by one hour daily can significantly reduce pool water cloudiness.
Therefore, make sure the system is also running for the recommended duration based on the size of your pool. To optimize the filter’s performance and longevity, I will advise you to clean & maintain it regularly.
Related Topics: Why is the Pool Cloudy After Shock
pH Imbalance & Chemical Reactions
If you have just poured pH increases into your pool water, it might lead to imbalances in other chemical levels, like total alkalinity or calcium hardness. This imbalance may also result in chemical reactions, contributing to water cloudiness.
Research published in the Journal of water health highlighted the relationship between pH level & water clarity. According to Chloramine Consulting, if the pH level is not within the recommended range according to your pool type & size, other chemical parameters will also get affected, also leading to increased cloudiness and reduced water quality.
I highly recommend regulatory testing of your pool water for pH, total alkalinity, and calcium hardness using a reliable testing kit for accurate readings. Also, make sure to adjust these water parameters as required to maintain a proper balance & prevent cloudiness.
Particulate Matter & Debris
Your pool water has accumulated particles & Debris, and the pool filtration system fails to remove them effectively. pH increases by nature are known to agglomerate these particles making them more visible, resulting in cloudiness.
When we examine the impact of Debris on water quality, we found that even small particles like dust, pollen, and skin cells may contribute to cloudiness in pool water if we don’t filter it properly.
Experts recommend regularly skimming and vacuuming the pool to resume any visible debris. Consider using a pool clarifier to help you filter particle clumps together more easily and efficiently.
3 Prevention and Solutions for Pool Cloudy After Ph Increaser
Regular Maintenance & Testing
First, I will advise you to regulatory test your water and make any necessary adjustments in its perimeter to maintain a clear & balanced pool. Also, invest in a good reliable pool water testing kit that gives you an accurate reading of PH, total alkalinity, and other chemical levels for proper optimization & balance.
By regular testing & adjustment of these parameters, you can effectively prevent an imbalance that may contribute to cloudy pools. Generally, I test my pool water once a week or after any significant rainfall or pool usage.
If you have used or used any necessary chemicals, follow the manufacturer’s instructions to maintain optimal water balance. Below, I am mentioning the required chemical parameters that you need to balance in your pool water for a safe & healthy swimming experience
Related Topics: What To Do About Salt Water Pool Cloudy Water?
Chemical Parameters | Recommended Range |
pH | 7.4 – 7.6 |
Total Alkalinity (TA) | 80 – 120 ppm |
Calcium Hardness | 200 – 400 ppm |
Adequate Filtration & Circulation
As I told you earlier, proper filtration & circulation is very crucial to maintaining clean pool water and a safe swimming environment. Therefore, select an appropriate filtration system depending on your pool size & type.
In the market, you will find three major types of filters: sand filters, cartridge filters, and diatomaceous Earth filters. Sand filters are the most common & affordable solution that you can use to trap particles & Debris.
If you want a more efficient solution to remove the smaller particles, go with the cartridge filters, which also require less maintenance. The diatomaceous filter is the best as it is highly effective in filtering even the finest particles, providing excellent water clarity.
Also, ensure proper cleaning and backwashing of filters regularly, no matter their type. Depending upon the filter type, you should follow the manufacturer’s recommendation to remove trapped Debris and maintain optimal filtration efficiency pools. Below I’m mentioning a proper guideline on how often you should clean and maintain your filter for effective filtration.
Filter Type | Maintenance Frequency |
Sand Filters | Backwash every 2-4 weeks, clean annually |
Cartridge Filters | Clean every 4-6 weeks, replace every 2-5 years |
DE Filters | Backwash every 4-6 weeks, clean annually |
Water Clarification Techniques
You can also employ a few water purification techniques to maintain crystal-clear water in your pool. In addition to regular maintenance & filtrations, you can take the help of water clarifiers & flocculants to address cloudiness.
These chemicals, in particular, are known to help particles clump together, making it easier for the filtration system to remove them. If you use clarifiers, it will work by coagulating tiny particles into larger plums that can be trapped easily by the filters.
On the other hand, flocculants help settle down the particles to the bottom of the pool, forming a sediment that you can vacuum manually to remove easily. You should run the filtration system continuously for a few hours after treatment to aid in the removal of the clump particles.
Troubleshooting Cloudy Water Issues
pH Testing & Adjustment
First, you need to determine whether pH is responsible for cloudiness. So, perform regular pH testing using a reliable pool water testing kit. If you find the pH low level being below the recommended range, adjust it using PH increasers in the appropriate dosage. Adding too much Increaser at once may cause overshooting in the desired pH range.
To determine if pH is contributing to water cloudiness, perform regular pH testing using a reliable pool water testing kit. If the pH level falls below the recommended range, adjust it by adding a pH increaser in the appropriate dosage.
Filtration System Maintenance
Even after maintaining a proper pH level, check the filtration system for any issues if your pool water is cloudy. Any issue with the filtration system might lead to cloudiness, like clogged filters, damaged valves, or insufficient circulation. If you find any problem, address these issues as soon as possible to restore optimal filtration & water quality!
Hi, This is Josh. I am a former competitive swimmer and current fitness enthusiast.
I created this site to share my love of swimming with the world!